4-Stroke Gas Power Concrete Vibrator Concrete Screed Cement Vibrating Machine US

Description

Product description: Imported bearings are used to ensure the service life of the machine, simple operation and convenient maintenance. Equipped with 4-stroke high-speed engine, stable quality, low fuel consumption, and durable. The handle is adjustable and easy to use. The whole machine is light in weight and easy to carry. The machine is also equipped with an emergency stop switch. Reduce the manual labor and cover more ground. Product parameters: Exciting force: 260Kg Length with ruler: 1-5 meters (without ruler) Power: 900w Quality: 25Kg Frame material: aluminum Machine size: 600*450*450mm Use frequency: 9500 -10000 times/min Fuel tank capacity: 0.65L Fuel: gasoline (any model can be used) Packing list: Concrete vibrating machine (need to be assembled by the customer, without ruler)
4-Stroke Gas Power Concrete Vibrator Concrete Screed Cement Vibrating Machine US
ITEM TYPE 1: 4-Stroke 38.5CC
38.5CC Walk Behind Concrete Cement Power Trowel Cement Surface Smoother Finisher
Product Description:
Imported Bearings
Are Used to Ensure the Service Life of the Machine, Simple Operation and Convenient Maintenance. Equipped with 4
-Stroke High-speed Engine
, Stable Quality,
Low Fuel Consumption
, and Durable. the Handle Is Adjustable and Easy to Use. the Whole Machine Is Light in Weight and Easy to Carry. the Machine Is Also Equipped with an
Emergency Stop Switch
.Reducing the manual labor with this device you can cover more ground in the same given time on a job.
Product Parameters:
Exciting Force:
260kg
Length with Ruler:
1-5 Meters (Without Ruler)
Power:
900w
Quality:
25kg
Frame Material:
Aluminum
Machine Size:
600*450*450mm
Use Frequency:
9500 -10000 Times/Min
Fuel Tank Capacity:
0.65l
Fuel:
Gasoline (Any Model Can Be Used)
Features:
1. Wide Range of Application
Can Be Used in Construction Sites Such As Houses, Tunnels, Bridges, Etc.
2. Damping Shaft
Fully Enclosed Hollow and Thickened Enclosure
, Not Easy to Enter Dust
3. Comfortable to Use
Shock-absorbing and Non-slip
Rubber Handle, Can Go Upstairs by Hand
4. Easy to Control and Easy to Use
No Flameout at High Temperature,
High Work Efficiency
, Just Pull It to Start
5. No Need to Add Water to Cool
6. the Handle Link Is Movable, It Can Touch the Ground at the Lowest Point and Stand Upright at the Highest Point
Packing List:
Concrete Vibrating Machine
(Need to Be Assembled by the Customer, Without Ruler)
ITEM TYPE 2: 4-Stroke 35.8CC (Silver)
4Stroke Concrete Vibrating Screed Gasoline Cement Vibrating Maker 35.8CC w/swich
1.Description
Imported bearings
are used to ensure the service life of the machine, simple operation and convenient maintenance. Equipped with a
four-stroke high-speed engine
, stable quality,
low fuel consumption, and durable
. The
handle is adjustable
and easy to use. The whole machine is
light in weight
and easy to carry. The machine is also equipped with an
emergency stop switch.
2.What's Included?
Concrete vibrating machine (need to be assembled by the customer, no ruler)
3.Features&Highlights
1. Easy to control and easy to use
High temperature without flameout
, high work efficiency,
just pull to start
2.
No need to add water for cooling
3. Fully enclosed vibration box
Completely enclosed hollow and
thick shell
, not easy to enter dust
4. The
handle link is movable
, it can touch the ground at the lowest point and stand upright at the highest point
5. Comfortable to use
Shock-absorbing and non-slip rubber handle
, can go upstairs manually
6. Wide application range
Can be used in
construction sites
, such as
houses, tunnels, bridges
, etc.
4.Weights&Dimensions
Machine size: 750 * 450 * 450mm
Net weight: 19Kg
5.Specifications
Exciting force: 260Kg
Ruler length: 1-5 meters (without ruler)
Power: 900w
Frame material:
all stainless steel
thick steel plate
Frequency of use:
9500 -10000 times/minute
Fuel tank capacity: 0.65L
Fuel: gasoline (any model can be used)
ITEM TYPE 3: 4-Stroke 35.8CC (Blue)
Product description:
Imported bearings are used to ensure the service life of the machine, simple operation and convenient maintenance. Equipped with a four-stroke high-speed engine, stable quality, low fuel consumption, and durable. The handle is adjustable and easy to use. The whole machine is light in weight and easy to carry. The machine is also equipped with an emergency stop switch.
Product parameters:
Exciting force: 260Kg
Ruler length: 1-5 meters (without ruler)
Power: 900w
Quality: 19Kg
Frame material: thick steel plate
Machine size: 750 * 450 * 450mm
Frequency of use 9500 -10000 times/minute
Fuel tank capacity: 0.65L
Fuel: gasoline (any model can be used)
Features:
1. Wide application range
Can be used in construction sites, such as houses, tunnels, bridges, etc.
2. Fully enclosed vibration box
Completely enclosed hollow and thick shell, not easy to enter dust
3. Comfortable to use
Shock-absorbing and non-slip rubber handle, can go upstairs manually
4. Easy to control and easy to use
High temperature without flameout, high work efficiency, just pull to start
5. No need to add water for cooling
6. The handle link is movable, it can touch the ground at the lowest point and stand upright at the highest point
Packing list:
Concrete vibrating machine (need to be assembled by the customer, no ruler)
ITEM TYPE 4: 4-Stroke 37.7CC
GX35 4stroke 37.7CC Gas Concrete Wet Screed Power Screed Cement 1-6M level ruler
Concrete Power Screed without any leveling ruler
Suitable with 1-6M leveling ruler(not include leveling ruler)
The power screed is ideal for smoothing, leveling, and placing concrete on a horizontal surface. It is powered by a 4 stroke motor
gas powered screeds not only are easier to use, require less manpower but also do a majority of the bull floating too. The ergonomical design and rubber isolators reduce vibration making the job easier for the operator.
Screed is the best solution for cutting the time to 1/4 compared to the traditional method while at the same time leaving a superior finish.
Power Screed Specs
Powered by 37.7cc Commercial Grade Engine
and comes with vibration isolators for comfort
Ergonomically Designed for easy use
37.7cc. 4 cycle gasoline engine power a well engineered and field proven eccentric system to frequencies up to 5200 rpm.
Swapping out beam lengths is easy which assures that you always have the right length for your project.
A strong, light weight frame allows the leveling rulers to be changed in seconds.
Lightweight Power unit and frame making it easy to maneuver and transport around the site.
Kick stand comes standard for keeping the motor upright and out of the cement.
Specification
Gasoline vibrator parameter:
Model
GX35
Power
1.2HP
Rotate Speed
5200r/min
Length
2-6m
Weight
25kg
Drive system
Flexible shaft
Engine
Four-stroke air-cooled gasoline engine
Gasoline Volume
0.65L
Dimension
2500*1400*960
Electric vibrator parameter
Power Force
100-400N
Engine
3/single Phase
Frequency
4500HZ
Power
0.065KW
Rotate Speed
4500r/min
Voltage
380v/220v
Shaft Length
1-4m
Driven system Electric vibrator
Paving speed
30m/h
Walking Speed
30m/h
Weight
15kg
Paving Thickness
10cm
Dimension
600*460*760
Structure & Working Principle
Concrete Vibrator mainly made up by the motor, transmission, scraper, vibrator, handle five major components.
Working principle: Concrete vibrator, is a vibrator floating on the concrete surface for direct tamping. It is attached to the vibrator mounted on the plate, work, through the plate chassis vibration will be introduced into the interior from the surface and the concrete fizzy. This type of vibrator is mainly applied to a large area of vibration, the thickness of the small cement concrete pavement, deck and concrete precast panels, etc.
Caution
It should be noted that the oil cup add 79ml oil chassis, do not add more, otherwise it is easy to reverse the interior of the cylinder, causing smoke and other adverse conditions, this time put the machine down, pour out the oil, the machine can then run for a while Back to normal. Change the oil every three days and remove the air bubbles before starting.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Brand
Unbranded
MPN
Does Not Apply
Type
Vibrator
Exciting force
260Kg
Length with ruler
1-5 meters (without ruler)
Power
900w
Quality
25Kg
Frame material
aluminum
Machine size
600*450*450mm
Use frequency
9500 -10000 times/min
Fuel tank capacity
0.65L
Fuel
gasoline (any model can be used)
On Nov 9, 2022 at 06:15:32 PST, seller added the following information: